deliverybas.blogg.se

1. #Driver Usb Device Vid 1F3a Pid Efe8 Xp how to#
2. #Driver Usb Device Vid 1F3a Pid Efe8 Xp update#
3. #Driver Usb Device Vid 1F3a Pid Efe8 Xp Pc#

Sunxi-fel uboot u-boot-sunxi-with-spl.bin Make sure to pick the right Trusted-Firmware (TF-A, aka ATF) target, for A64 and H5 it's sun50i-a64, for H6 it's sun50i-h6, for H616/H313 it's sun50i-h616.Īnd boot it over USB (the 'sunxi-fel uboot' command requires an up to date version of sunxi-tools): Make CROSS_COMPILE=aarch64-linux-gnu-j$(nproc) B元1=/path/to/trusted-firmware/build/sun50i-a64/debug/bl31.bin SCP=/dev/null Make CROSS_COMPILE=aarch64-linux-gnu- _defconfig Make CROSS_COMPILE=arm-linux-gnueabihf-j$(nproc) Make CROSS_COMPILE=arm-linux-gnueabihf- Cubietruck_defconfig If you encounter troubles, try a tarball with the latest formal U-Boot release before giving up. Git clone -b next git:///u-boot-sunxi.gitīoth of these branches are bleeding edge and may contain bugs from time to time. Or alternatively the 'next' branch from the sunxi custodian tree: To obtain the U-Boot sources, clone the current U-Boot master branch: Then you have successfully switched the device into FEL mode and it is ready to accept commands or load the system over USB.īoot the system over USB Mainline U-Boot (v2015.04 and newer versions) Getting the mainline U-Boot sources

#Driver Usb Device Vid 1F3a Pid Efe8 Xp how to#

Please refer to the FEL howto for information on how to boot to FEL mode.

#Driver Usb Device Vid 1F3a Pid Efe8 Xp Pc#

If you encounter troubles with the sunxi-tools package from your distro, then getting sunxi-tools directly from the github repository is always an option.īefore the 'sunxi-fel' tool can actually talk to your device, the device needs to be connected to your PC using a "USB A to USB mini/micro B" cable.Īnd then the device needs to be switched into FEL mode. However they are also removing certain tools and renaming executables at their discretion. Warning: some Linux distributions are already providing packaging for sunxi-tools. Spiflash-write addr file Store file contents into SPI flash Spiflash-read addr length file Write SPI flash contents into file Spiflash-info Retrieves basic information

#Driver Usb Device Vid 1F3a Pid Efe8 Xp update#

but following the 'multi' syntax:Įcho-gauge "some text" Update prompt/caption for gauge output Write-with-xgauge addr file Extended gauge output (updates prompt) Write-with-gauge addr file Output progress for "dialog -gauge" Write-with-progress addr file "write" with progress bar Write address file Store file contents into memory Read address length file Write memory contents into file Writel address value Write 32-bit value to device memory Readl address Read 32-bit value from device memory Memmove dest source sizeĜopy bytes within device memory Reset64 address RMR request for AArch64 warm boot

Hex address length Dumps memory region in hex (to transfer other files needed for the boot). This allows combining "uboot" with further "write" commands U-Boot execution will take place when the fel utility exits. Uboot file-with-spl like "spl", but actually starts U-Boot To memory (default address from image), but won't execute it. (u-boot-sunxi-with-spl.bin), this command also transfers that If file additionally contains a main U-Boot binary sid SID Select device by SID key (exact match) d, -dev bus:devnum Use specific USB bus and device number l, -list Enumerate all (USB) FEL devices and exit p, -progress "write" transfers show a progress bar The command line syntax of the sunxi-fel utility: This utility is used for booting the system over USB and it needs to be installed first. There is a utility in the sunxi-tools repository called 'sunxi-fel'.